Produkt-Kategorien
- 10" Rackmounts (53)
- 19" Rackmounts (146)
- Extensions (23)
- Kawasaki (1)
- Rackmount Basics (56)
- 1.5U (2)
- 1U (54)
- Alcatel (1)
- Bosch (2)
- EdgeMax (1)
- Genexis (1)
- Grandstream (1)
- HDD / SSD (1)
- Heatmiser (1)
- Hubitat (1)
- NETGEAR (1)
- Odroid (1)
- Orange Pi (1)
- Philips (1)
- Protectli (1)
- Raspberry Pi (1)
- Sonos (1)
- Tado (1)
- technicolor (1)
- Teltonika (1)
- tp-link (11)
- Ubiquiti – UISP (1)
- Unifi (17)
- Universal (2)
- X-Sense (1)
- Yeastar (1)
- Zima (1)
- Zyxel (1)
- 2U (1)
- Manufacturer (2)
- Raspberry Pi Racksystem (15)
- Side parts (6)
- Wall mount (8)
- Winter sports (1)
© drei-d-w.de
Showing 1–12 of 306 results
0.5U cover for USW-Enterprise-8-PoE – 19″ rackmount
€8,93
0.5U cover for USW-Enterprise-8-PoE - 19" rackmount (0.5U height)
With this rackmount you can keep order in your network rack. A holder holds the devices securely on the base plate, so they do not slip.
ATTENTION: As the device becomes very hot during operation, this rackmount is printed exclusively with ASA material
More detailed description see below
1.5U adapter for 1U base plates
€3,94
With this adapter, 1U base plates can be integrated into a 1.5U rack configuration. Please note that the width of the 1U base plate must be selected when ordering. The total width of the adapter is calculated from the ordered configuration + 20mm additional width.
Example: If the 1U base plate has a width of 94.00mm, then the 94.00 configuration must be ordered. The adapter plate therefore has a total width of 94.00mm + 20.00mm = 114.00mm
10″ Universalmount
From: €26,78
10″ Universalmount (Kopie)
19″ Universalmount (small) Configurator
€29,75
Rated 5.00 out of 5
Configure your 19" 1U rackmount with the Universal Rackmount as base.
Attention: The configuration Universalmount + 2x RaspberryPi Mount is only recommended if the Raspi's are powered via POE.
The device is fixed to the rackmount by means of a flexibly adjustable mounting system.
Scope of delivery:
- Universal rackmount with mounting system
- Incl. Mounting material
- your additionally configured components
- 2x M6 rack rails screw
- 2x M6 rack rails nut
- Maximum device dimensions: (width x depth x height) 140x182x40mm
- Minimum device dimensions: (width x depth x height) 100x72x1mm
19″ USG+Switch8 conversion kit
€4,76 – €5,95
Conversion kit to turn 1x base plate USG & 1x base plate Switch8 into a 19" rackmount (like here: 19" USG&Switch8 Rackmount)
Conversion kit consisting of:
- 1x connector
- 2x sidemount
2x 2.5″ HDD – 10″ rackmount
From: €17,86
2x AZ-Delivery HD44780 1602 LCD Module + NodeMCU – 10″ Rackmount
From: €23,80
2x Odroid N2+ – 19″ Rackmount
From: €38,08