0.5U cover for USW-Enterprise-8-PoE – 19″ rackmount
0.5U cover for USW-Enterprise-8-PoE - 19" rackmount (0.5U height)
With this rackmount you can keep order in your network rack. A holder holds the devices securely on the base plate, so they do not slip.
ATTENTION: As the device becomes very hot during operation, this rackmount is printed exclusively with ASA material
More detailed description see below
1.5U adapter for 1U base plates
With this adapter, 1U base plates can be integrated into a 1.5U rack configuration. Please note that the width of the 1U base plate must be selected when ordering. The total width of the adapter is calculated from the ordered configuration + 20mm additional width.
Example: If the 1U base plate has a width of 94.00mm, then the 94.00 configuration must be ordered. The adapter plate therefore has a total width of 94.00mm + 20.00mm = 114.00mm
10″ Universalmount
10″ Universalmount (Kopie)
19″ Universalmount (small) Configurator
Configure your 19" 1U rackmount with the Universal Rackmount as base.
Attention: The configuration Universalmount + 2x RaspberryPi Mount is only recommended if the Raspi's are powered via POE.
The device is fixed to the rackmount by means of a flexibly adjustable mounting system.
Scope of delivery:
- Universal rackmount with mounting system
- Incl. Mounting material
- your additionally configured components
- 2x M6 rack rails screw
- 2x M6 rack rails nut
- Maximum device dimensions: (width x depth x height) 140x182x40mm
- Minimum device dimensions: (width x depth x height) 100x72x1mm
19″ USG+Switch8 conversion kit
Conversion kit to turn 1x base plate USG & 1x base plate Switch8 into a 19" rackmount (like here: 19" USG&Switch8 Rackmount)
Conversion kit consisting of:
- 1x connector
- 2x sidemount
2x 2.5″ HDD – 10″ rackmount
2x AZ-Delivery HD44780 1602 LCD Module + NodeMCU – 10″ Rackmount
