Keystone aperture narrow
Cover for holding keystones.
In comparison to the Keystone wide aperture, the distance between the Keystones is narrower in this version (see technical data sheet).
Supplied without cable ties. The lead-through of the strain relief for the cable ties is 5mm wide and 2mm high.
Technical data sheet: KB-S-B1-1_Technical_Datasheet
Aperture width
- 2-Keystones: 59,40mm
- 3-Keystones: 76,80mm
- 4-Keystones: 94.20mm
- 5-Keystones: 111,60mm
- 6-Keystones: 129.00mm
- 7-Keystones: 146,40mm
- 8-Keystones: 163.80mm
- 9-Keystones: 181,20mm
- 10-Keystones: 196,60mm
Keystone aperture V2
Cover for holding keystones.
In comparison to the Keystone wide aperture, the distance between the Keystones is narrower in this version (see technical data sheet).
This version is cheaper compared to the Keystone wide & Keystone narrow version, but does not offer the option of strain relief.
Aperture width
- 2-Keystones: 59,40mm
- 3-Keystones: 76,80mm
- 4-Keystones: 94.20mm
- 5-Keystones: 111,60mm
- 6-Keystones: 129.00mm
- 7-Keystones: 146,40mm
- 8-Keystones: 163.80mm
- 9-Keystones: 181,20mm
- 10-Keystones: 196,60mm
Keystone-aperture-wide
Cover for holding keystones.
In comparison to the narrow keystone cover, the distance between the keystones is wider in this version (see technical data sheet).
Supplied without cable ties. The lead-through of the strain relief for the cable ties is 5mm wide and 2mm high.
Aperture width
- 2-Keystones: 66,20mm
- 3-Keystones: 90,20mm
- 4-keystones: 114.20mm
- 5-Keystones: 138,20mm
- 6-Keystones: 162,20mm
- 7-Keystones: 186,20mm
- 8-Keystones: 210,20mm
microSD card extension 25cm
NETGEAR LM1200 & 2-Port Keystone Bezel – 10″ Rackmount
NETGEAR LM1200 & 2-Port Keystone Bezel – 19″ Rackmount
Odroid N2+ – 10″ Rackmount
Odroid N2+ – 19″ Rackmount
Odroid N2+ & 2x 2.5″ HDD double mount – 19″ rackmount
Odroid N2+ & 2x Raspberry Pi – 19″ Rackmount
Odroid N2+ & Cloud Key Gen2+ – 19″ Rackmount
Odroid N2+ & Raspberry Pi – 19″ Rackmount
Orange Pi R1 Plus LTS – Baseplate
Orange Pi R1 Plus LTS - Baseplate
Base plate width: 80.00mm
SD card slot is extended by means of an extension (to be purchased separately). e.g. here) to the front.
Fan mount for 30x30x8mm fan
- SP Connect Bar Clamp Mount Pro: https://sp-connect.de/collections/motorrad/products/bar-clamp-mount-pro
- SP Connect Anti Vibration Module: https://sp-connect.de/collections/motorrad/products/anti-vibration-module
An iPhone 11 Pro can be seen in the pictures. There is still some room to insert the device, but the smartphone should not have much larger dimensions. A disadvantage of the whole thing is that the bracket so now only works in the top grid of the windshield. If I move the screen further down, the viewing angle is no longer suitable and the speedometer is covered. For me, this is not a problem, because I always drive the disc only in the uppermost position anyway.